Catch up on stories from the past week (and beyond) at the Slashdot story archive

 



Forgot your password?
typodupeerror
×
IT

Magnets Are Switching Up the Keyboard Game 82

Magnetic switches are emerging as a potential game-changer for mechanical keyboards. By using magnets instead of physical contacts, these switches allow users to adjust the actuation point of each key. While still a nascent technology lacking standardization, magnetic switches could bring a new level of customization to keyboards, TechCrunch writes.
This discussion has been archived. No new comments can be posted.

Magnets Are Switching Up the Keyboard Game

Comments Filter:
  • by Tablizer ( 95088 ) on Monday April 08, 2024 @09:35PM (#64379746) Journal

    Just don't spill your drink into it. [yahoo.com]

    • Re:Careful, though (Score:4, Insightful)

      by Powercntrl ( 458442 ) on Monday April 08, 2024 @09:44PM (#64379768) Homepage

      Well, as ICP once said, "Fucking magnets, how do they work?"

    • Well, what happens depends from the liquid being para-, dia- or ferro-magnetic...
    • Re: (Score:2, Flamebait)

      If you watch the full clip, he’s talking about electromagnets breaking down on aircraft carriers, how much less reliable and more expensive they have been in practice to build and maintain than existing steam solutions based on real-world feedback from servicemen in the field. But if you let facts and reality get in the way of your self-serving political biases, you wouldn't have anything to support them, so you just do you!!
  • is new again with an added patentable improvement which is kinda plainly obvious to anyone that has some knowledge about the subject and spends a few moments to think about it . though as always the devil is in de details to get it working appropriately.
    • Re:Everything old... (Score:5, Informative)

      by Drishmung ( 458368 ) on Monday April 08, 2024 @10:20PM (#64379848)
      This is just a Hall Effect switch, with some tweaks so you can change where the tactile 'click' is.

      Granted, the best keyboards I have ever used were Hall Effect, but they were also extremely expensive.

    • though as always the devil is in de details to get it working appropriately.

      Quite the hilarious struggle when your customer base was dumpster-diving for a Model M just last month.

    • Those details you so casually blow off -are- the patentable parts. If it was so obvious then it would already be state of the art and everyone would be doing it. SMH

      • by ceoyoyo ( 59147 )

        Lots of people have done it. The article links a couple. Magnetic reed keyboards are from the 70s, but weren't used much past the 80s. Hall effect keyboards were made in the 60s. They were breathtakingly expensive though, so they were only used in high reliability cost-is-no-object applications.

        Now you can buy one off Amazon for $150. Gamer magazines seem to write an article titled "What are Hall Effect Keyboards?" every five years or so.

        • I haven't looked into their patents but I'm replying to someone who said there are new things which someone in the art could do if they thought about it plus some other unspecific "stuff" to get something new.

          That's what patents are about.

          And to be clear, a patent doesn't have to be some dramatic life changing improvement. Just something a tiny bit better than what everyone has been doing is sufficient. Is that true in this case? Without examining the specific claims of their patent and comparing to what

  • by EkriirkE ( 1075937 ) on Monday April 08, 2024 @09:53PM (#64379780) Homepage
    Magnets in keys with reed switches under have been around for maybe a century or more. I imagine the "adjustable actuation point" is just hall effect sensors in analogue mode
    • by gweihir ( 88907 )

      Yep. Cheap hall-effect sensors are now $0.1 or less per piece, so within reach to put one into each key.

    • by psavo ( 162634 )

      I have this "MX Anywhere 3" mouse and the scrolling wheel has electronically adjustable resistance (can be toggled completely off and then the wheel says wheee).
      Pretty damn nice and convenient.

  • A Keyboard? (Score:4, Funny)

    by nsuccorso ( 41169 ) on Monday April 08, 2024 @10:03PM (#64379814)

    How quaint!

    • How quaint!

      At least we aren't making keyboards to hang on the wall as art instead of being used (cough, vinyl), so there’s that. Just sayin.

      • At least we aren't making keyboards to hang on the wall as art instead of being used (cough, vinyl), so there's that. Just sayin.

        We were doing that back in the 1970s when vinyl was still king. Records wear out, and when they are worn out, they might as well be hung on the wall, if that's your thing.

    • Hello, computer!

  • by i_ate_god ( 899684 ) on Monday April 08, 2024 @10:06PM (#64379822)

    Could each key be on top of an electromagnet whose magnetic force you can adjust? I'd enjoy having harder to hit letters that my index fingers press, but easier to hit keys that my pinkies reach for.

    • Neat idea but since the actuation point in these uses a magnet and corresponding sensor it might be a choice of having only one or the other.

      I'm just glad those crumby rubber dome keyboards can finally be ignored. With the early ones inevitably one of the domes would develop a crack and now you have a weak and soon to be stuck dead key.
    • You can do that now by just buying different keyswitches and putting them into the same keyboard. For around $60 you can get a halfway decent RGB keyboard with hotswap switches.

    • by gweihir ( 88907 )

      You can get aftermarket springs for Cherry and compatible keys (e.g. gateron, Khail) if you want to make them harder. Search for "Mechanical Keyboard Shaft Spring" on AliExpress, for example. These go up to 150g actuation force. You have to open the switches though to install them and that seems to require desoldering them or use of some special tool or careful application of force.

    • by Can'tNot ( 5553824 ) on Monday April 08, 2024 @11:09PM (#64379946)
      In addition to what the others have said about swapping in switches with different springs, the answer to your question is: No, but you can do it with permanent magnets.

      Or at least, there's a DIY project for that. Look up the AHEK95 Void Keyboard.
    • Could each key be on top of an electromagnet whose magnetic force you can adjust? I'd enjoy having harder to hit letters that my index fingers press, but easier to hit keys that my pinkies reach for.

      Could have sworn someone came out with a keyboard a few years ago that had programmable levels of actuation for each key depending on your preference. Did it with light switches I believe.

    • by AmiMoJo ( 196126 )

      Realforce make keyboards that are like that already. Different resistances on different keys. They are rather expensive but seem to have a loyal following.

      That seems more practical. While being able to adjust each key from software would be cool, you would probably just set it once and then never change it again.

  • For example Cherry and Kahil offer pretty much anything you could want. Hence I think this is primarily about making them more expensive. A hall-sensor in each key will do that.

    • I came here to say pretty much the same thing, another gimmick to make them expensive. Bring back the model M with included LED backlighting. THAT would be something worth looking into.

      • i would buy this immediately. I have a USB Unicomp model M and i love it
        • I have a few model Ms and model Fs. Nothing beats those steel beasts. I had a Unicomp a few years back but was one of the unlucky ones that purchased one during their faulty USB controller phase and they refused to honor their warranty. It's a shame, because I really did like that keyboard but they lost me as a customer forever. There's a company offering modern model Fs too: https://www.modelfkeyboards.co... [modelfkeyboards.com]

          • Exactly! you can pry my Model M (errm actually a Dell-branded clone or lookalike i don't care at this point because I'm used to it!) from my cold dead hands. Gluttons for punishment even got used to a ZX-81 or or similar Apple ca. 2016
    • It is not about usability, fancy keyboards became hobby in its own right. I for example type this comment on a Model F replica. It is nicer to type on than stock MX Blues, but not $300 nicer, yet it is a hobby and a whim. Hall-effect keyboards offer some features beneficial to gamers, like analogue keys (speed of movement dependent on travel of WASD keys), and nothing depends on mechanical contact so they can be very smooth. With cheap hall effect sensors, it would be even feasible to replicate Symbolics S
  • by 4wdloop ( 1031398 ) on Monday April 08, 2024 @10:55PM (#64379918)

    .. when placed in the water. So this keyboard will be useless on submarines, which are also in the water..., no?

    • So those magnet fishing video on Youtube are fake then, right ... RIGHT? LOL, can't tell if you were joking or not. (Hopefully you were otherwise STEM has failed).

      • by Anonymous Coward

        You obviously didn't look at the very first post of this story.

        Just don't spill your drink into it. [yahoo.com]

      • I am dead serious - I trust our elected officials, esp to the highest office, don't you?

        “Now all I know about magnets is this. Give me a glass of water. Let me drop it on the magnets. That’s the end of the magnets.”

        LOL

    • by bn-7bc ( 909819 )
      Well if there is water at keyboard level inside the sub, I expect thhe least of your worries would be the keyboard not working as that tends to indicate a rather severe leak which if left un fixed will lead to issues like death down the line, but you were probably just joking
  • by Rosco P. Coltrane ( 209368 ) on Monday April 08, 2024 @11:12PM (#64379948)

    A Wooting Two HE [wooting.io] and I love it.

    I'm not even a gamer: I'm a bit of an old school terminal kind of guy and I bought it to see if I could type faster with it. And I sure can!

    It is a bit light for my taste, but it's nice to define different actuation depths for it. For example, I set the spacebar to work only at the very bottom, so I can rest my thumbs on it while I type (bad habit, I know). And HJKL are set to trigger higher for faster navigation in VI.

    The absolute lack of friction feels nice too. And while it's noisy, it's not overwhelming like a Model M.

    I'm also hoping the contactless action will make it last a long time. But I've had it for 8 months now and I can see it's getting clogged up with lint, what with the switches being exposed and all. That's a bit concerning.

    Lastly, it's eye-wateringly expensive. But I reckon it's worth it if you're a heavy keyboard user like me. And I want to support them for making a configuration utility that works well in Linux. So I guess it's money well spent.

    • by AmiMoJo ( 196126 )

      The issue I have is the lack of friction, specifically the lack of tactile feedback when you reach the actuation point.

      If they could make it so that an electromagnet engages when the key is activated to simulate that feeling, that would be great.

      You can dampen a Model M a bit, but I'm willing to put up with the noise to get that unmatched tactility.

      • The issue I have is the lack of friction, specifically the lack of tactile feedback when you reach the actuation point.

        To each his own. Personally I don't really like clicky keyboards. The feeling annoys me. I much prefer linear keys.

  • This is not new (Score:3, Informative)

    by BuckDutter ( 10145835 ) on Monday April 08, 2024 @11:14PM (#64379956)
    There are "gaming" products from razer and the likes that have exactly those features, including a modifiable actuation depth, not sure why this is news.
    • by Anonymous Coward

      Came to say this, this feature has literally been around for years. This isn't a thing that "is emerging," it has emerged and is purchasable off the shelf, and I'm pretty sure the concept of using hall sensors in buttons is decades old.

    • Yup. I've had this in my Steelseries Apex Pro for a couple of years. I can adjust the trigger depth per-key.
  • Given that LPs and watches are part of some weird retro trend, I'm sure the retro hipsters will be eager to spend heavily on ghastly keyboards with their choice of cheaply-printed colored plastic key tops. They have to economize by leaving half the keys off, nonetheless. It's not like they ever figured out how to use a numeric keypad anyway.

    Be sure to buy gel-pack wrist supports to reduce the carpal tunnel syndrome, and earplugs to block out the key noise. Your roomies will also need their own.

    • It's not that weird. I wear a watch (and have for decades) because it's useful to know the time. I specifically like not having to check my phone because being always alert to random notifications sucks.

      I like records for much the same reason.

      Hipsters are already buying mechanical keyboards with no numeric keypad. They look cool, but I like the modern style soft type.

      But goodness you're not superior by hating things.

  • by OrangeTide ( 124937 ) on Tuesday April 09, 2024 @12:40AM (#64380054) Homepage Journal

    My friend designed [tomshardware.com] a hall-effect keyboard, the XMIT. I still have mine and it works great still (after several years of use). But it didn't have any fancy configuration features like to control the activation press. Still a pretty cool technology.

  • I'm sure that will bring a whole new set of vulnerabilities. Remote typing with powerful magnets, anyone?

  • by nothinginparticular ( 6181282 ) on Tuesday April 09, 2024 @04:24AM (#64380266)
    If they're going to the effort of using magnets, why not stick some coils in the well used keys and harvest the energy so no need for batteries?
  • by rapjr ( 732628 ) on Tuesday April 09, 2024 @05:20AM (#64380342)
    Optical user interfaces may never wear out. This is probably why companies don't make them, no one would buy their products after a while if they never wear out because they'd already have one that works. A flaw in capitalism that keeps us from some nice futures.
    • Optical switches are more complex so they will just have other kinds of failures.

      Hotswap n-key-rollover mech rgb keyboards are now under a hundred bucks for decent quality, and there are many different keyswitches available that you can drop in that have different feels to them. Cherry, gateron, outemu each have multiple colors which are nominally copies of one another's switches but which are subtly different so you can do some pretty fine tweaking. The only thing you don't get that way is the variable act

    • A flaw in capitalism that keeps us from some nice futures.

      Indeed; however, every other economic system has performed worse in this regard. Ask the Soviets what kinds of electronics they got to play with versus the kinds of electronics that Americans got to play with. How is the selection in North Korea this time of year?

      Capitalism is a fantastic economic system. The only issue I have with it is that some people seem to think Capitalism is a Social System too. It is explicitly NOT a social system and any social system built with the concepts of Capitalism is going

  • Light-based keyboard switches are a thing.

  • by pcjunky ( 517872 ) <walterp@cyberstreet.com> on Tuesday April 09, 2024 @07:57AM (#64380616) Homepage

    This is nothing new, in fact quite old. Hall effect switches were used in keyboards at least as far back as the 1970's. I have an Intel MDS-II (Circa 1978) system that has one. I've already replaced a few of it's switches.

The most difficult thing in the world is to know how to do a thing and to watch someone else doing it wrong, without commenting. -- T.H. White

Working...