Follow Slashdot stories on Twitter

 



Forgot your password?
typodupeerror
×
Upgrades

Intel Core I7 Launched, Nehalem and X58 Tested 194

MojoKid writes "Today marks the official launch of Intel's new Core i7 processor, the most major overhaul of Intel's core processor architecture since the release of their Core 2 design. As has been reported, the Core i7 is a major departure from Intel's aging Front Side Bus architecture of old, now replaced by Intel's QPI (Quick Path Interconnect) serial links. This 20 lane bi-directional (40 lanes total) point-to-point connection provides 6.4 GT/s of bandwidth and scalability for future multi-socket designs as well. In addition, the Core i7 now has an integrated triple channel memory controller offering over 3X the bandwidth of the previous Core 2 architecture with DDR3 system memory. Though the product is set to ship in volume later this month, the early benchmark numbers show Intel's new chip is markedly faster clock-for-clock versus their previous generation CPU and much faster than anything AMD has out currently."
This discussion has been archived. No new comments can be posted.

Intel Core I7 Launched, Nehalem and X58 Tested

Comments Filter:
  • Not out... (Score:5, Insightful)

    by GenP ( 686381 ) on Monday November 03, 2008 @10:45AM (#25611821)
    It's not out until I can buy one from Newegg.
  • Sweet! (Score:4, Interesting)

    by symbolset ( 646467 ) on Monday November 03, 2008 @10:46AM (#25611841) Journal

    A little hot, but on time, in time for Christmas and slamming the benchmarks. Hey, there is a system that can run Crysis with all the features turned on!

    Maybe a price break on the LGA775 quad lineup now please?

    • Re:Sweet! (Score:5, Informative)

      by Wintergr33n ( 1369379 ) on Monday November 03, 2008 @11:19AM (#25612361)
      Funnily enough a gaming performance review found not that much difference in running Crysis on i7 (http://www.bit-tech.net/hardware/2008/11/03/intel-core-i7-920-945-965-review/4) and in fact worse performance for the brand-new Far Cry 2 (http://www.bit-tech.net/hardware/2008/11/03/intel-core-i7-920-945-965-review/5). It remains to be seen whether or not other new games show a similar effect or not...
      • This isn't too shocking. With the move of the mem control into the i7, there's an extra latency that has to be programmed for/around in video drivers/cards. I suspect that once updated drivers/cards start flowing, the performance of these games on i& will roll back to the top of the pile.

  • by ciderVisor ( 1318765 ) on Monday November 03, 2008 @10:50AM (#25611897)
    It's not big and it's not clever. I like my bytes and bits, thank you very much.
    • by mdmkolbe ( 944892 ) on Monday November 03, 2008 @10:53AM (#25611941)
      What is a GT/s? (Honest question, looking for an honest answer.)
    • But the bus doesn't transmit bits or bytes always. Different buses have different quantities they send on a transfer, and the Core i7 can feed those available today (PCI, PCI-Express, etc) with 6.4 billion per second.

      No bits or bytes anywhere to be seen.
      • by thelexx ( 237096 )

        WTF?

        Quantities of what then? Digital data breaks down to bits, regardless of how it's transported.

        If what you say is literally true, then they have to be converting the digital to an analog signal or there's no data either.

        Better explanation required.

        • by Anpheus ( 908711 )
          In the case of PCI-Express, Serial ATA and a number of other technologies, it's an 8b/10b encoding. 10 bits are sent which encode 8 bits of data to ensure there are no errors. 10 gigabit ethernet uses a different type of encoding so the transfer size to that over the bus may be different (and perhaps, slower per transfer.)

          I think the goal is to make the transfer mechanism not care what physical data is sent over the line, much like the physical layer of the OSI model, and to allow the CPU or other handling
          • so if you use an encoding that transfers 1 TB of data per packet versus an encoding that transfers 1 bit of data per packet the Quick Path Interconnect will transfer the same number of packets per second for both? wouldn't that mean the total bandwidth would change depending on the encoding?

            the HotHardware article states that:

            QPI is a serial point-to-point interconnect that offers up to 25.6GB/s of bandwidth per port over 40 data lanes--20 in each direction.

            which makes more sense than being able to magicall

      • But the bus doesn't transmit bits or bytes always.

        You really don't know what you are talking about. A bus ALWAYS transfers bits. ALWAYS.

        GT/s is only half of a useful metric - it's analogous to talking about CPU frequency without mentioning what specific CPU. The other half of the metric is the width of the bus. Put them together and you can get the actual bandwidth of the bus - in bits and bytes - of the bus. For example, 6GT/s on a 64-bit bus is 48Gigabytes per second.

    • But giga-transfers is a more accurate way to term it, especially when talking about something like the QPI (Quick-Path Interconnect), which is a point-to-point packet-based interconnect similar to AMD's Hypertransport. Each packet is going to involve some number of transfers worth of header information, and some number of transfers worth of data, and these are going to change based on the nature of the transaction. So the actual amount of GB/s of real data you get is going to depend on the nature of traff

    • Only the highest-end processor, Core i7 965 Extreme Edition, supports QPI at 6.4 GT/s. The 920 and 940 support only 4.8 GT/s. So the amount of bandwidth on a QPI link is:

      • 6.4 GT/s * 20 bits/direction / 10 bits/byte (8b-10b encoding!) = 12.8 GB/s per direction (25.6 GB/s per link)
      • 4.8 GT/s * 20 bits/direction / 10 bits/byte (8b-10b encoding!) = 9.6 GB/s per direction (19.2 GB/s per link)

      This is comparable to the HyperTransport bandwith of a Phenom processor (4.0 GT/s), which AMD is supposed to scale to

  • i7? (Score:5, Funny)

    by hcdejong ( 561314 ) <hobbes@@@xmsnet...nl> on Monday November 03, 2008 @11:11AM (#25612239)

    Of course, "Core 3" was what everyone expected them to do, so Intel couldn't possibly use that. Using imaginary numbers is much more logical.

    • Wouldn't that make it "Core 7i" instead of "Core i7"?

      • Re: (Score:2, Funny)

        by Anonymous Coward
        Fortunately, the imaginary unit and real numbers commute.
        • Re: (Score:2, Funny)

          But it defies the common notation. I think "Core 0+7i" would be unambiguous. What the hell is wrong with those marketing types?

      • i is used by mathematicians, physicists, and other riff raff.
        The EE crowd would call it Core 7j.

    • So a Beowulf cluster would have negative 49 cores?

    • by Phat_Tony ( 661117 ) on Monday November 03, 2008 @12:54PM (#25614303)
      Why on earth would you be expecting the the Core 3 to follow the progression of:

      Core
      Core Duo
      Core2 Duo

      The correct answer should be the 2Core2 Duo, or the Core2 Duo Dos, or the BiCore2Duo. Maybe the DuoCore2 Duo? Anyway, follow the pattern- keep adding things that mean "2." In several years, we should have had BiDuo2Core2DoubleDuo Dos MarkII.

      Instead, it looks we're heading for the e8, or the pi9, or the ln10, or maybe the 11!. Except for that they'll change the pattern again, because now everyone's expecting math terms.
      • Why on earth would you be expecting the the Core 3 to follow the progression of:

        Core
        Core Duo
        Core2 Duo

        Because that's not the progression.

        The technology is Core -> Core 2.

        The "Duo" indicates that there are two cores of the appropriate type (Core or Core 2). (And the alternative "Quad" indicates four cores, and "Extreme", oddly enough, is used for 2 or 4 cores, but indicates better support for overclocking.)

        So, in terms of the part of the branding used to indicate the core technology, Core 3 would be a not

        • And, there's also a Solo moniker.

          But, Core 2 (or, rather, the Core microarchitecture that Core 2 is based on) is as big of a leap over the ancient P6 (from 1995) that the original Core Duo and Core Solo were based on. (Core Duo essentially being two Dothan Pentium Ms sharing a cache, with better SSE support, and a die shrink, and Core Solo being the single-core version.)

          • Er, I screwed up. The Core microarchitecture was as big of a leap over P6 (or bigger) as Nehalem is over Core.

      • Re: (Score:2, Funny)

        by Spider Man ( 44847 )

        I think they were on the same path you were thinking. Then they decided to have a naming scheme that didn't include confusion.

        Core (1) = 1
        Core Duo (1 + 2) = 3
        Core 2 Duo (1 + 2 + 2) = 5
        2 Core 2 Duo (1 + 2 + 2 + 2) = 7

        Thus i7

    • I know for a fact that 7 is a real valid number, sorry to burst your bubble.
    • Well this early release was about 7 days out of phase or so.
  • But... (Score:2, Funny)

    Will it still play solitaire?
    • by bberens ( 965711 )
      It seems no one else noticed the naming convention matches the proposed name for the next major release for Windows. This processor is designed specifically to play Solitaire on Windows 7.
  • Comment removed (Score:5, Interesting)

    by account_deleted ( 4530225 ) on Monday November 03, 2008 @11:21AM (#25612401)
    Comment removed based on user account deletion
    • by frieko ( 855745 ) on Monday November 03, 2008 @11:33AM (#25612643)
      Crosstalk and synchronization issues make parallel links impractical in the GHz range. There's a reason USB, PCI Express, HT/QPI, Ethernet are all serial and packet-based. The only major holdout is RAM, but I see it going serial eventually.
      • Comment removed (Score:5, Informative)

        by account_deleted ( 4530225 ) on Monday November 03, 2008 @11:45AM (#25612891)
        Comment removed based on user account deletion
        • FB-DIMMs are dead. Intel is dropping them in favor of QuickPath.

          FB-DIMMs use 10 parallel paths (14 in the other direction). RDRAM used 4, 8 in later version (for more performance).

          I have no idea where people are getting the idea parallel is dead. Most these busses mentioned are parallel.

      • Gigabit ethernet uses 4 parallel links. PCIe uses 1,2,4, 8 or 16 parallel links. QPI uses 20 parallel links.

        Serial just isn't fast enough for things like RAM, PCIe or QPI.

        • by frieko ( 855745 )
          You're confused because most protocols are a little of each philosophy. Gigabit ethernet uses one bidirectional serial link in which 4 wires are used to send one symbol. PCIe uses 1,2,4, 8 or 16 serial links. QPI uses 20 serial links.

          Ob car analogy: Picture a 4 lane highway. Every clock you can send 4 regular cars (serial) or one four-lane-wide monster car (parallel). Queue the Hummer jokes.
  • by wikinerd ( 809585 ) on Monday November 03, 2008 @11:21AM (#25612407) Journal
    AMD was brave enough to quit using FSBs in PC CPUs and replaced them with HyperTransport. Years later, Intel also says goodbye to FSBs and uses a similar technology. The innovator took all the costs, and now someone with more resources gets the marketshare. After all, the consumers only want a speedy CPU, they don't care who was the innovator, and speedy CPUs are more readily available by whoever has the most resources to build them. It is, therefore, seen that being the innovator is not always a smart movement in the business chessboard, at least not if you cannot build your innovation in sufficient quantity. That said, I congratulate Intel for finally bringing the cores closer to the RAM, which is a much better technical solution than using an FSB. They should, perhaps, have done that much earlier.
    • Comment removed (Score:5, Interesting)

      by account_deleted ( 4530225 ) on Monday November 03, 2008 @11:26AM (#25612481)
      Comment removed based on user account deletion
    • I thought HyperTransport was developed as open technology, allowing anyone to use it. I thought it was one of AMD's advantages, and I can't believe it took Intel so long to ditch the traditional FSB. What hurts AMD is pushing release dates back over and over again. What hurts AMD is not being able to keep up with Intel's fab processes. What hurts AMD is Intel using illegal tactics to bump AMD out of the market. AMD decides the only way to stay in the market is to sell their procs super-cheap, but then they don't make any money doing so.

      It didn't help that when AMD was kicking Intel's butt in performance (Athlon 64 vs P4) AMD didn't gain much in market share because guys like Michael Dell said he'd never ship an AMD processor in one of his desktops, regardless of price and performance. Now that Intel is kicking AMD to the curb on high-end performance, all AMD has going for it is the low-cost market.

      • Comment removed based on user account deletion
      • You also forgot why people like me stopped using AMD (after using them exclusively from 1995 till 2005). They kept changing the sockets which meant I couldn't upgrade my system one piece at a time any more.

        • Intel didn't change sockets? How many sockets have they launched in the past six years? AMD has launched 3 main sockets in that time (754, 939 and AM2). Anyone remember Intel ditching Socket 423 after less than a year?

          And AMD would release one proc on different sockets so you could still upgrade with your old mobo. For instance, when they came out with Socket 939, they were still releasing new procs under Socket 754. Even though they have Socket AM2/AM2+, you can still get Socket 939 procs.

          AM2 came out in early 2006, and when I build my next rig in the spring, I'll still likely be building an AM2 rig. That being said, I'll probably go with a new motherboard for a faster bus, and faster memory support.

          I could keep my existing mobo which will support quad-core AM2+ processors with a BIOS update, but to get the full potential, I need a new motherboard for the bus speed and memory improvements.

          Intel is in the same boat. Chipsets and cores change often enough that you need to replace everything to get the best possible results.

          Your logic was that you didn't want to change sockets and replace your entire system (AMD provided you that option to stay on the same socket) so you replaced your whole system and changed sockets to go to Intel.

          How does that make sense?

          • Why yes I do have socket 754 and 939 cpus sitting in my cupboard with one working machine still running using AM2. I buy all my computer stuff at Fry's and every time AMD introduced new sockets, Fry's pretty much dropped the older CPUs and motherboards. If you went to the wall of motherboards at Fry's all the Intel mobos used the same socket while the AMD ones had a variety. As another data point consider that the Pentium 4 and Celeron D use the same socket whereas the Athlon 64 and Sempron used differen

            • Re: (Score:3, Informative)

              by Enderandrew ( 866215 )

              Actually the Gentoo docs tell you to compile for the more generic architectures, and not the real specific CPU for reasons like that. Then again, I always compiled for the specific CPU.

              I miss me some Frys. I loved that store. However I live in Nebraska these days, so I use NewEgg. You can still order a 386 motherboard on NewEgg (I kid you not).

    • by TheGratefulNet ( 143330 ) on Monday November 03, 2008 @11:29AM (#25612529)

      DEC invented that hypertransport for the DEC alpha. AMD liked the idea and adopted it. it was not AMD's idea.

      • Re: (Score:3, Informative)

        You seem to be thinking about the Alpha EV6 front-side bus architecture that AMD used on the original Athlon. It's very different from the HyperTransport bus, and predates it by several years.

        • Re: (Score:3, Interesting)

          yes, I was thinking of that. but how radical is the new amd vs that older ev6 stuff?

          the whole idea is that its NOT a front side bus and its pt-pt from every node to every node.

          intel still has this FSB notion and amd dropped that years ago (?)

          • A bus based around each processor being connected to a central hub, and a bus based around each processor being connected to one or more other processors allowing a variety of system topologies, is a pretty radical change imo. Electrically ev6 is more similar to HT in that they're point-to-point busses instead of a multi-drop FSB, but logically it's more similar to an FSB, with N processors contending for a single north bridge. That 'logic' aspect affects a lot of the design of the protocol since there's

    • by illumin8 ( 148082 ) on Monday November 03, 2008 @02:53PM (#25616359) Journal

      AMD was brave enough to quit using FSBs in PC CPUs and replaced them with HyperTransport. Years later, Intel also says goodbye to FSBs and uses a similar technology. The innovator took all the costs, and now someone with more resources gets the marketshare. After all, the consumers only want a speedy CPU, they don't care who was the innovator, and speedy CPUs are more readily available by whoever has the most resources to build them. It is, therefore, seen that being the innovator is not always a smart movement in the business chessboard, at least not if you cannot build your innovation in sufficient quantity. That said, I congratulate Intel for finally bringing the cores closer to the RAM, which is a much better technical solution than using an FSB. They should, perhaps, have done that much earlier.

      Amen. I'm tired of explaining to my colleagues why AMD Opteron servers outperform Intel for use in database servers because of memory bandwidth and ccNUMA architecture. It's nice that Intel has finally realized that they can't keep designing processors for desktop PCs and not care about I/O bandwidth. This does mean I can finally be confident that when I buy a new 8-CPU, 8-core (64 total core) database server from Intel I don't have to worry about my poor MCH (memory controller hub) choking access to that nice 512GB of RAM I have hanging off of it.

      Those of us building database servers, VMware clusters, and other high memory bandwidth applications can rejoice because the Nehalem architecture is finally almost here.

    • HyperTransport doesn't replace FSB. Only I/O and cache synchronization transfers go over HyperTransport, data accesses do not (as AMD integrated the memory controller).

      Data accesses do go over QPI though. And I don't think that QPI really moves the RAM closer to the cores. QPI's main value is that by having fewer pins, it gives more flexibility in locating the bridges and such on the motherboard.

  • When are the 2 way ones that will be in the next mac pro coming out?

    For the desktop where are the nvidia boards and the lower end MB we need more the just the high cost X58 boards.

    Also apple should have a 1 cpu core i7 system as well.

  • Expen$ive (Score:2, Interesting)

    by Eddy Luten ( 1166889 )
    Looks great and everything but who has money for such toys? Core i7 965 Extreme, 6GB DDR3, NVIDIA GTX 280, X58 Mobo + other junk = easily $1,600 - $2,000.
    • Re: (Score:2, Insightful)

      by vegiVamp ( 518171 )

      Sure, but I don't buy a new pc whenever I get a haircut.

      I got my first PC, an 386, around 1992. Next thing was a Pentium 1. Then it was up to a P4, which died on me some two months ago. Still haven't bought a new one,but when I do, I expect it to last me another five years at least.

      2k$ over 5 years makes for 400$ per year. That's a lot less of an investment than what a lot of people spend on their PC.

      That being said, I have no burning desire to play the every new game at the top of it's pixel range, either.

    • by afidel ( 530433 )
      Companies. Specifically companies needing CAD workstation (though they'd use a card that costs almost as much as your estimate). Also I can't wait for Core i7 to come to the HP DL line, I expect I can finally use Intel for database work because it's been their very poor multicore memory bandwidth that has kept AMD in the lead up till now.
    • Looks great and everything but who has money for such toys? Core i7 965 Extreme, 6GB DDR3, NVIDIA GTX 280, X58 Mobo + other junk = easily $1,600 - $2,000.

      More than that, likely; $1,600 - $2,000 sounds right for the processor (~$1,000 itself) and RAM for that setup. But you max out a system using the best processor available, and its expensive. The first PC my family got had an MSRP of approximately $4,500 (and the employee purchase price that we actually paid was ~$2,500) -- in 1984.

      By comparison, $2,000 in

  • by Ecuador ( 740021 ) on Monday November 03, 2008 @11:37AM (#25612699) Homepage

    Link to the middle of an ad-laden article and to the Cinebench of all pages - because, you know, that is what the average /. reader is running...

    Also, add a nice touch: forget to mention that while the i7 is faster clock for clock with the Core 2, it currently tops out at 3.2GHz and has some sort of overclock protection (lowers clock when it goes over 110A or 130w).

    My cheap Core 2 is running at 4GHz on just the stock fan, I don't see myself upgrading to the i7 anytime soon.

    What did you say? ... What do you mean Cinebench would still run faster?

    • by Predius ( 560344 )

      The linked article showed a Core i7 running at 4.15ghz with stock air cooling.

      • by Ecuador ( 740021 ) on Monday November 03, 2008 @12:16PM (#25613483) Homepage

        You made me RTFA. The same ad-laden FA I was complaining about. Thanks. So, from the article.

        Because the Core i7 Extreme 965 has its overspeed protection removed--i.e. its multipliers are unlocked--we overclocked the processor by raising its multiplier to 25 and also experimented with an increased QPI speed.

        My 4GHz Core 2 is not a $1000 *Extreme* part. Humanly priced i7s will have overspeed protection.

        I have the feeling you knew this was the case anyway, but had me read TFA just for kicks... shame on you!

    • Re: (Score:3, Insightful)

      by avandesande ( 143899 )

      It would be nice for them to put one or two 'old' processor scores for reference, I am using a 5YO celeron and don't have the slightest idea what these scores mean in to relation to what I am using.

  • Anandtech Review (Score:5, Informative)

    by slashuzer ( 580287 ) on Monday November 03, 2008 @11:46AM (#25612905) Homepage
  • by WittyName ( 615844 ) on Monday November 03, 2008 @11:50AM (#25613009)

    http://www.planetx64.com/index.php?option=com_content&task=view&id=1435&Itemid=14 [planetx64.com]

    1) 64 bit macro-op fusion is new. See it tested here..

    2) Virtualisation is more efficient with nested pagetables.

    3) Gaming should benefit, since all x58 mobos support Crossfire
          and nVidia SLI.

    4) 12 gigs ram supported with 2gb dims - this is rare for desktop boards.

    Numerous other minor tweaks, but read it for yourself..

    Have fun with your upgrade dollars!

  • by Ritz_Just_Ritz ( 883997 ) on Monday November 03, 2008 @11:54AM (#25613067)

    And I was *just* about to retire my "old" socket 940 dual-core opteron box for a quad core Intel system. I think I'll just wait another month or two and jump to the i7 platform instead. 8-)

    Would be nice to see some video and audio encoding benchmarks and some real world application performance numbers instead of teenmarks (gaming performance).

    Cheers,

  • Servers? (Score:3, Interesting)

    by slashkitty ( 21637 ) on Monday November 03, 2008 @12:02PM (#25613231) Homepage
    Is there a comparable intel chip for servers coming out? It's been over a year and still nothing can beat the price/performance of the xeon 3220..
  • More reviews (Score:4, Informative)

    by Vigile ( 99919 ) * on Monday November 03, 2008 @12:22PM (#25613651)

    Another review with some more data, including memory channel performance testing, good explanations of overclocking process, etc.

    http://www.pcper.com/article.php?aid=634 [pcper.com]

  • Go follow the link to the hothardware site. Please don't tell me they are still going to ship their latest CPU ovens with a dorky heat sink that won't allow you to run the CPU beyond 40% sustained usage. I'll buy it after there is at least 50 comments on Newegg saying it works.

    ..and Intel and AMD, please blast through 3.2Ghz per CPU so all programs work faster all the time.
  • What good is it? (Score:2, Insightful)

    Can we actually get any more performance out of our computers with faster CPUs and RAM CPU transfers? I've had processors with a 2.2ghz/core speed for some time now(years), and I always find that the only time I really get a slow-down is when accessing hard-disk, not when playing in memory. Jumping from 2.2ghz quad-core to 3.2ghz quad-core is not going to bring you to a new utopia in desktop performance (like upgrading from a P3 to AMD64 was).

    For CPUs and memory, the market needs to focus on power usage
    • by NevDull ( 170554 )
      I'm certainly interested in performance for reasons other than games, and for home use as well. I might not be able to give an exhaustive list, but transcoding is one area where a huge boost in compute performance will substantially change overall throughput. I've been playing with Elemental Technologies BadaBoom, which uses CUDA to encode h.264 on the GPU, but it'll only use the first GPU it finds, and as of this point it's still limited on input and output formats. As the PC becomes more of a digital m
      • I second that. Transcoding is a big deal, and not just for folks ripping their commercial videos to servers. It takes several days to complete a full transcode my FLAC audio files to the preferred compressed flavor of my audio player, which changes every year or three. I do it very infrequently because of the time it takes. I would prefer to sync with the device on the fly, but processing speeds are just too slow to do that. I'd rather leave the computer running for a couple days once and then sync from th

    • Re: (Score:3, Insightful)

      Jumping from 2.2ghz quad-core to 3.2ghz quad-core is not going to bring you to a new utopia in desktop performance (like upgrading from a P3 to AMD64 was).

      Assuming a simple scaling, you're talking about roughly 50% more performance.

      Which, in the mid-late 2000s era is huge.

      A lot of games that folks play are CPU-constrained. So that's 50% more framerate, or the difference between something that feels pokey vs something that works well.

      That's 50% faster encoding / transcoding for videos.

      Yeah, it's
  • And security? (Score:2, Interesting)

    by incubuz1980 ( 450713 )

    I wonder if they have fixed the security problems of the past.

    http://hardware.slashdot.org/article.pl?sid=07/06/28/1124256 [slashdot.org]

  • Fuck it, we're doing 1366!

Get hold of portable property. -- Charles Dickens, "Great Expectations"

Working...